Motul grubunun bir bölümü olan MotulTech-Baraldi, yüksek basınçlı döküm ve metal alaşım ekstrüzyon sektörlerinde verimli uygulama için tasarlanmış çok çeşitli yağlayıcıları ve sistemleri araştırma ve üretme konusunda uzmanlaşmıştır.
Amacımız, alüminyum endüstrisindeki günlük operasyonlarda yer alan müşterilerin ve profesyonellerin ihtiyaçlarını karşılayan etkili çözümler sunmaktır. Bunu yapmak için MotulTech-Baraldi, endüstriyel süreçlerin sürekli optimizasyonunu amaçlayan "Aluminium Way" adı verilen teknik ve bilimsel bir yaklaşımı benimser. Yüksek basınclı kalıp
WE ARE WAITING FOR YOU IN DUSSELDORF FROM 12 TO 16 JUNE
The appointment with GIFA, the most important International Fair for the foundry world is approaching, and from 12 to 16 June Dusseldorf will be crowded by foundry workers from all over the world.
MOTULTECH BARALDI EUROPEAN SALES MEETING
After three long years of forced absence, we finally had the pleasure of meeting again in person with our distribution partners in Europe.
GIFA 2023 – 15TH INTERNATIONAL FOUNDRY TRADE FAIR WITH TECHNICAL FORUM
After 4 years from the previous edition, the GIFA fair returns, gathering exhibitors and visitors from all over the world, including Asia.
THE ROAD TO MINIMIZE DIE LUBRICATION IN HPDC
Minimal lubrication in die casting is increasingly mentioned as an innovation of our times
1973 – 2023: 50 YEARS OF COLLABORATION WITH FOMA SPA
The new year 2023 brings with it the achievement of a goal of which we are proud: fifty years of ongoing relationships between Motultech Baraldi and Foma Spa!!
WE MADE OUR CUSTOMERS SAVE 7,700 TONS OF WATER IN 2022!
Water is a very important basic and priority resource for humanity and over the years the awareness of its value has grown universally
THANKS TO OUR VISITORS!
We could not be more satisfied for the participation in this Fair and we want to thank all those who visited us and our colleagues from Motultech Asia.
1ST FOUNDRY TRADE FAIR SOUTHEAST ASIA GIFA 2022
We will be present, together with our colleagues from Motultech Asia, to show our DLO "Die Lubricant Optimization" approach and illustrate how thanks to its use it is possible to save precious natural resources and reduce the environmental impact.
PHYSICAL SIMULATION OF THE LUBRICATION PROCESS: "LUBE TEST"
For about ten years, a physical simulator called "Lube Test" has been designed and built in our Research Center, capable of carrying out spray tests on a H11 steel mold heated to variable temperatures typical of the diecasting process.
STAG LINE: A COMPLETE RANGE OF PRODUCTS FOR EXTRUSION
Motultech Baraldi for twenty years has continued to develop innovative and sustainable solutions to the various problems of lubrication of extruders and can offer the most complete and updated range of products available on the market today.
IT WAS A PLEASURE TO HOST THE MOTULTECH COLLEAGUES IN OUR PLANT
The first Motultech International Kick Off Meeting took place in Bologna from 6 to 8 July and we could not be more proud of the choice to hold this event in our city!
DLO IS A NEW APPROACH TO THE OPTIMIZATION OF LUBRICATION IN HPDC
Our project to make HPDC process “SUSTAINABLE” starts from our production up to the proposal of our lubricants.
iCast EVO: A WEB APP THAT TRANSLATES THE OPTIMIZATION OF THE LUBRICATION CYCLE INTO ECONOMIC VALUE
iCast EVO is a Web App developed by Motultech Baraldi to evaluate in economic terms the advantages that can be obtained with a lubrication cycle optimization test.
THANKS TO ALL OUR VISITORS!
Participation in EUROGUSS 2022 was a success and we owe it to the many visitors who came to visit us on our stand.
AALENER GIESSEREI KOLLOQUIUM 2022
On 5 and 6 May the Conference dedicated to Diecasting will be held at the Hochschule of Aalen in Germany.
DIE CASTING FOR STRUCTURAL APPLICATIONS
The Italian Association of Metallurgy and its Die Casting Study Center organized two Study Days on the use of diecasting for structural applications on June 14 at the IDRA in Travagliato (BS) and June 24 at the Mille Miglia Museum in Brescia.
EUROGUSS 2022 – 14TH INTERNATIONAL TRADE FAIR FOR DIE CASTING
After postponing it due to the health emergency linked to COVID, the EUROGUSS fair will finally be held in June in Nuremberg, entirely dedicated to diecasting.
WE WILL PARTICIPATE AT THE ET 22 EXTRUSION CONFERENCE IN USA
The ET 22 Extrusion Conference will be held in Orlando, Florida from 3 to 5 May 2022.
DEFECTS OF DIECASTING: SOLDERING
On May 3, 2022, in Webinar mode, a Study Day will be held organized by the Die Casting Technical Committee of the AIM (Italian Association of Metallurgy), dedicated to the soldering defect.
NEW VERSION OF ICAST LUBE ANALYZER SOFTWARE JUST RELEASED
The optimization of the lubrication process of the diecasting dies is a founding pillar of the activities that Motultech Baraldi offers to its customers
PRESEZZI EXTRUSION EXTENDS THE RANGE OF EXTROLUB PRODUCTS
In January 2021 a partnership agreement was officially announced between Presezzi Extrusion Group and Motultech Baraldi
MOTULTECH BARALDI IS CERTIFIED "CRIBIS PRIME COMPANY"
In its long corporate history, Motultech Baraldi has always put business ethics towards its customers and compliance with its commitments towards suppliers at the top of its business.
EUROGUSS 2022 – INTERNATIONAL TRADE FAIR FOR DIE CASTING
MotulTech Baraldi will be present at EUROGUSS 2022 in Nuremberg (Germany) from 18 to 20 January 2022.
NEW VERSION OF ICAST LUBE ANALYZER SOFTWARE
MOTULtech BARALDI is glad to announce the release of the new version 3.5.1 of the software ICAST LUBE ANALYZER™, for the optimization of die lubrication process in High Pressure Die Casting.
THE EXTROLUB LUBRICANT PRODUCED EXCLUSIVELY BY MOTULTECH BARALDI
The commercial collaboration provides the exclusive supply by Motultech Baraldi for Presezzi Extrusion Group of the EXTROLUB.
Motultech-Baraldi and Marposs signed a partnership agreement for the further development of TTV (Total Thermal Vision).
WE THANK ALL OUR VISITORS! – SHANGHAI, 7-9 JULY 2021
China Diecasting 2021 in Shanghai ended with great satisfaction and success. We want to thank all our visitors and the Motultech China Team for the interesting meetings we had.
LUCCO BORLERA OPTIMIZES LUBRICATION WITH MOTULTECH BARALDI
Each Lucco Borlera product is the result of a careful analysis of the functional specifications of the component, which in 95% of cases is intended for the Automotive sector.
ICAST LUBE ANALYZER
MOTULtech Baraldi is glad to announce the release of the new version of the ICAST LUBE ANALYZER™